product categories
Certifications
Address: No. 489, Hongtai 6th Road, Xiaoshan Economic Development Zone, Hangzhou, Zhejiang, China.
Permanent Anti-static Master Batch JW-AS02
The permanent anti-static master batch is an excellent general-purpose polymer anti-static master batch. It features good heat resistance, excellent performance, and uniform distribution. It can be commonly used for adding to plastics such as PP, PE, ABS, PC, PBT, PA, PPO, and PPE. By adding 17 - 25%, the anti-static value can reach 10⁸ - 10⁹ ohms, and the anti-static value is stable, not affected by environmental humidity and temperature, and remains permanently effective. Products can be formulated with different colors as required.
Permanent Anti-static Master Batch
Product Form
Irregular particles ranging from light yellow to yellow.
I.Application Instructions
The permanent anti-static master batch is an excellent general-purpose polymer anti-static master batch. It features good heat resistance, excellent performance, and uniform distribution. It can be commonly used for adding to plastics such as PP, PE, ABS, PC, PBT, PA, PPO, and PPE. By adding 17 - 25%, the anti-static value can reach 10⁸ - 10⁹ ohms, and the anti-static value is stable, not affected by environmental humidity and temperature, and remains permanently effective. Products can be formulated with different colors as required.
II.Addition Amount
|
Resin |
Addition Amount |
Achievable Effect |
|
PP |
15 - 17% |
10⁸ |
|
PE |
17 - 20% |
10⁸ |
|
ABS |
20 - 25% |
10⁸ |
|
PA |
22 - 25% |
10⁸ |
III.Usage
It can be directly blended with the base materials for use. The dispersion effect will be better after blending and granulating. IV.Combined Use
It can be used in coordination with all known additives. It can also be used together with fillers. However, fillers may absorb part of the anti-static value. To achieve the same effect, it is recommended to appropriately increase the addition amount. When blended for use, it may reduce the physical properties. It is recommended to add toughening agents.
V.Packaging and Storage
1.25 kilograms per package.
2. It must be stored in a dry place at room temperature. After opening the package for use, it should be sealed to avoid the product from being affected by light and moisture absorption.
