Product Features:

1. Excellent flame retardancy, compatibility, and dispersibility; no leaching and excellent color retention.

2. Complies with EU RoHS and REACH environmental standards.

3. High thermal stability and good mechanical properties, particularly excellent impact resistance.

4. Anti-dripping properties and excellent electrical properties;

Recommended Formulation:

1. Flame retardant: 25%, Antioxidant: 0.4%, Polyethylene (PE): 74.6%;

2. Other additives: Select as needed; due to the excellent processability of this flame retardant, it is recommended not to add other lubricants;

3. Knead the mixture in a high-speed mixer for 20 minutes;

Processing Guidelines:

1. Recommended extrusion processing temperature: 175–190°C; screw speed: 120 rpm;

2. Injection molding processing temperature: 190–205°C;

3. It is recommended to dry the material at approximately 100°C for 2 hours prior to injection molding;

Packaging, Storage, and Transportation:

1. Packaged in 25 kg double-layer composite bags; store in a cool, dry environment for up to 12 months; transport as non-hazardous goods.

2. This product is intended for general use and contact.

Precautions:

1. Do not exceed a filler content of 10%; talc masterbatch yields better results. Do not add calcium carbonate, as this will negate the flame-retardant effect!

2. Since the melting points of different virgin resins vary, the recommended flame-retardant loading ratio may differ slightly. Exceeding the recommended loading ratio will result in reduced flame-retardant effectiveness as the amount added increases.