product categories
Certifications
Hotline:400-167-5355 +86-571-82138550
Address: No. 489, Hongtai Sixth Road, Hongken Farm, Xiaoshan Economic Development Zone, Hangzhou, Zhejiang, China
Tel: +86-571-83532215
Fax:+86-571-82879575
Website: www.hafukeji.com
Your Current Location:Website Homepage > Product > PET/PBT Flame Retardant
PBT and PET flame retardants UL-94 V0JW-01-FR1010
Main components include: coil frames, transformer frames, relays, connectors, terminal blocks, switch sockets, circuit breaker housings, headlight bases, lamp housings, plugs, sensor housings, wiper accessories, and engine peripheral plastic parts.
Detail
一、Product Features:
二、 Recommended Mixing Ratio:
1. Flame retardant: 13%, Antioxidant: 0.4%, PBT/PET: 86.6%;
2. Other additives: Select as needed; Due to the excellent processing performance of this flame retardant, it is recommended not to add other lubricants;
3. Knead the mixture in a high-speed mixer for 20 minutes;
三、 Processing Technology:
1. Recommended extrusion processing temperature: 175-190℃, speed: 120 rpm;
2. Injection molding processing temperature: 190-205℃;
3. It is recommended to dry at approximately 100℃ for 2 hours before injection molding;
四、 Packaging, Storage, and Transportation:
1. 25Kg composite double-layer packaging, store in a cool, dry environment for 12 months, transport as non-hazardous goods.
2. This product is for routine use and contact.
Precautions:
1. Do not add more than 10%, talc masterbatch will have a better effect; do not add barium sulfate, otherwise the flame retardant effect will be lost! 2. Different new materials have different melting points, so the addition ratio of flame retardant will also be slightly different. When the addition ratio is exceeded, the greater the amount added, the worse the flame retardant effect.
1. Excellent flame retardancy, compatibility, and dispersibility; no exudation and excellent colorability.
2. Complies with EU RoHS and REACH environmental standards.
3. High thermal stability and good mechanical properties, especially excellent impact resistance.
二、 Recommended Mixing Ratio:
1. Flame retardant: 13%, Antioxidant: 0.4%, PBT/PET: 86.6%;
2. Other additives: Select as needed; Due to the excellent processing performance of this flame retardant, it is recommended not to add other lubricants;
3. Knead the mixture in a high-speed mixer for 20 minutes;
三、 Processing Technology:
1. Recommended extrusion processing temperature: 175-190℃, speed: 120 rpm;
2. Injection molding processing temperature: 190-205℃;
3. It is recommended to dry at approximately 100℃ for 2 hours before injection molding;
四、 Packaging, Storage, and Transportation:
1. 25Kg composite double-layer packaging, store in a cool, dry environment for 12 months, transport as non-hazardous goods.
2. This product is for routine use and contact.
Precautions:
1. Do not add more than 10%, talc masterbatch will have a better effect; do not add barium sulfate, otherwise the flame retardant effect will be lost! 2. Different new materials have different melting points, so the addition ratio of flame retardant will also be slightly different. When the addition ratio is exceeded, the greater the amount added, the worse the flame retardant effect.
Related product recommendations
